Gluer machine belts are an extremely widely used category in industrial belts, and are basically homogeneous, generally consisting of a nylon base plus rubber. However, there is a large difference in the quality of the gluing machine belt on the market. This is because of the difference in splicing technology, we now look at the production process and technical points of the gluing machine belt.
1、Cutting and slitting
Cutting and slitting as the first process of gluer machine belt, very important, cutting if not flat, when using may appear run off and other phenomena, this process of industrial belt manufacturers of slitting equipment differences are not large, mainly in the operator.
2、Gluer machine belt grinding head lap
The gluer machine belt grinding head can be said to be the most difficult step in the production of the gluer machine belt, and the technical differences between industrial belt manufacturers are large. One is a manual head grinding machine, it is difficult to control the two ends of the lap part of the same and affect the quality of the joint of the piece of base belt. The other is a fully automatic CNC head grinding machine for lap, the quality is more guaranteed.
3、Gluing
The gluer machine belt is to use adhesive splicing method, the key point of this process is that the lap part must be completely coated evenly, so that the tensile strength of the gluer machine belt joint can meet the requirements.
4、Temperature and pressure splicing
This process can be done by controlling the temperature and time according to the thickness of the strip. The operator needs to clean and level the splicing table before putting it in.
5、Other factors
Here is the main tip for buyers of gluer machine belt, the same kind of gluer machine belt for different machinery and equipment life will vary greatly, the life of the gluer machine belt can only be compared horizontally, gluer machine belt manufacturers will not promise life. However, it is certain that in the case of the same material, the products of gluer machine belt manufacturers with good technology for splicing gluer machine belts generally have a longer service life.
The above is what yonghangbelt brings to you to share the production process and technical points of the gluer machine belt, hope it can help you.
Please contact us direct for more information regarding your specific requirements.
URL video:http://www.yhbelt.com
Whatapp&wechat:+ 0086 13418103085
Email :sales@yhbelt.com
YONGHANG specializes in produce and custom coated transmission belts for 12 years.
Contact Details
