The properly store and use method of automatic folding clothes packaging machine polyamide belt!| Yonghangbelt

1. Storage to avoid direct sunlight, and will be placed in as shady a place as possible, more than half a meter from the ground. It is recommended to spread it out naturally in a horizontal direction and it is strictly forbidden to be squeezed and deformed.

2. Install the polyamide belt according to the marked pulley surface, the running direction arrow and the tensioning mark to ensure the parallelism of the pulley.

3. The standard elongation of the lamellar belt is 1.8%. After tensioning, run the polyamide belt for 2-3 minutes to distribute the tension evenly, then stop and measure the tension, mark if the original tension range is still maintained and top up as appropriate.

4. For cross drives, a rotating body can be inserted in the cross section to extend the service life.

5. The rotation of the drive belt pulling device helps to extend its service life. Please install the moving device in the position before the belt enters the driven pulley.

6. Please note that nylon flat belts are resistant to various oils, greases and other general purpose chemicals, but not to concentrated organic acids, inorganic acids, phenols and alcohols.

7. Polyamide belts are normally used normally between -10°C and +80°C.

Please contact us direct for more information regarding your specific requirements.

URL video:http://www.yhbelt.com

Whatapp&wechat:+ 0086 13418103085

Email :sales@yhbelt.com