First, every day is to often check the sealing of the reducer surface and shaft end, such as oil leakage is serious, must identify the causes and take appropriate measures.
Second, every day after work often check the oil volume of the reducer. When the oil level is too low, that is, the little finger into the oil level plug hole, bending contact not oil, should add a comparable brand of lubricant.
Third, clothing folding machine need to frequently check the wear and tear of the clothing folding machine polyamide flat belt, to maintain the appropriate initial tension, do not make the initial tension is too large. Note to keep the polyamide flat belt clean, avoid sunlight or rain and snow soaked, avoid contact with acids, alkalis, oils, organic solvents and other substances, 1 m away from the heating device. Clothing folding machine polyamide flat belt as an important part of the folding machine conveying, need to be more care!
Fourth, garment folding machine use to frequently check the sealing situation at both ends of the output shaft of the reducer to prevent oil leakage, tablecloth folding machine use process to keep the reducer clean.
Fifth, clothing folding machine in the rotation process is dependent on the reducer in the rotation, all reducer is the power source of the folding machine, the folding machine must be replaced after 300 runs of lubricating oil, the second time for 1000 hours, and later for every 2000 hours to replace.
![Yonghangbelt polyamide flat belt manufacturer tell you pay attention to the main points when using the folding machine 1]()
Please contact us direct for more information regarding your specific requirements.
URL video:http://www.yhbelt.com
Whatapp&wechat:+ 0086 13418103085
Email :sales@yhbelt.com
![Yonghangbelt polyamide flat belt manufacturer tell you pay attention to the main points when using the folding machine 2]()
