YongHang Will Explain To You: Extrusion Haul Off Belts Use Precautions

Extrusion haul off belt bottom belt is multi-chip belt, the surface rubber is mainly composed of buna rubber. The traditional processing process is to do a good job on the bottom belt, and then use glue to glue the top rubber, Yong Hang's extrusion haul off belt is a one-time vulcanization production, with the advantages of non-degumming. The reason for the powder falling off from the top rubber is the quality of the belt itself, and the top rubber is not wear-resistant. We suggest that customers pay attention to the elasticity of the rubber, but also pay attention to the hardness of the rubber. Generally 55-60 hardness is enough, if too soft, also easy to appear powder phenomenon. On the other hand, the belt and pulley can not completely bite caused by the second case, we give the following improvement program:

1. If the belt tooth type is large, we must process the belt teeth, grinding it a little smaller, so that it completely bite the pulley.

2. If the pulley teeth are too large, we must return to the manufacturer to process the pulley. It is recommended that the belt and pulley use the same production, to ensure a high degree of bite.

Now to talk about the use of traction machine belt to pay attention to the maintenance of several elements:

1. Belt placed when not in use, please use sealed packaging.

2. Avoid direct sunlight, placed in a cool and ventilated place.

3. When installing the belt, pay attention to the balance and tension of the pulley.

4. Install the machine is not used for a while, it is best to take down, sealed packaging, in order to extend the life of the tractor belt.

Please contact us direct for more information regarding your specific requirements.

URL video:http://www.yhbelt.com

Whatapp&wechat:+ 0086 13725100582

Email :sales@yhbelt.com