These are a few important points to keep in mind when installing SFAT10 toothed belt.

1. Preparation:

   - Before installation, make sure the specification for installing SFAT10 toothed belt matches with the machine, and prepare the corresponding related tools.

   - Check the quality of SFAT10 toothed belt for any problems, such as surface damage, product breakage and so on. You can feedback the situation at the first time, avoiding the damaged products installed to the machine, which will lead to malfunction.

2. Installation environment:

   - When installing the SFAT10 toothed belt, the side should be cleaned up except for the necessities of the installation to avoid interfering with the installation process. The area where the belt is to be installed should be cleaned to avoid unnecessary damage to the product caused by dust or previous residual stains.

   - When installing, should be a good grasp of the position of the product, leaving a maneuverable position, convenient for the next replacement.

3. Installation steps:

   - Please follow the instructions on the corresponding installation manual of SFAT10 toothed belt, and make sure that the installation is carried out by professional personnel to ensure that the product can be installed and used normally.

   -Avoid using excessive force to manipulate the product during installation of the SFAT10 toothed belt, as this may cause damage or deformation to the product. When the product cannot be installed, the size and specification of the product should be checked in time. Avoid forced installation.

   - During the installation process, sharp tools should be allowed to touch the SFAT10 toothed belt, so as to avoid the product scratching or damaging the surface.

4. Adjustment and testing:

   - After installation of the SFAT10 toothed belt is complete, the product needs to be adjusted and tested to ensure proper operation.

   - After installation, the stability and tightness of the product should be checked, and if any looseness or defects are found, some fine adjustments and repairs should be made if necessary.

   - It is recommended that after the completion of the adjustment, and then a few comprehensive running tests, which can ensure that if the product fails to avoid losses, to ensure that the product's performance and functionality.

5. Maintenance and care:

   - After installation, the product needs to be inspected and cleaned regularly to ensure that it remains in optimum working condition.

   - Follow the maintenance and care recommendations in the product's instruction manual to extend the product's service life

>>Click "YONGHANG® SFAT10 toothed belt" for more information about our products!

YONGHANG® Transmission Belt With more than 20 years of rich experience in the industry, The Company integrates research and development, production and customization, ODM&OEM Service, CE RoHs FDA ISO9001 Certification, R&d Centers, with more than 10,000m²+ factory, Molds More than 50+ sets of precision equipment, More than 8000+ sets of Molds, professional technical research and development team, precision manufacturing, providing one-stop high-quality transmission products customization service! Welcome to www.yhbelt.com for more information! Article copyright: YONGHANG® Transmission Belt, please specify the source, thank you for your cooperation!

Please contact us direct for more information regarding your specific requirements.

URL:https://www.yhbelt.com/

Whatapp&wechat:+ 0086 13725100582

Email :sales@yonghangbelt.com