How to choose a pasting belts?| Yonghangbelt

You have heard of pasting belts, but in the use of the process, sheet-based belts are also called for high-speed drive belts, good elasticity, smooth running, low production costs and other advantages, widely used in all walks of life, at this moment many people will ask how to choose a pasting belts?

The following are some of the advantages of pasting belts.

1. Simple structure, low cost and low maintenance cost.

2. Good elasticity of the belt body, smooth running and low noise.

3. Suitable for drives with a large centre distance, but the drive profile is large and the compactness is poor.

4. The belt must be tightened so that the shaft and bearings are subjected to greater forces.

5. Pasting belts and pulleys can clash and heat up, so they should not be used in areas where there is a risk of bursting.

6. Friction drive, compact drive section, sliding, low tension and other advantages. Smooth running and no noise.

When choosing a pasting belts, be sure to carefully observe whether the surface of the pasting belt is flat. The cleanliness and neatness of the pasting belt surface is of secondary importance. When using a pasting belt, pay attention to the surface of the pasting belt without deformation or distortion. This is the basic condition and prerequisite for the purchase of pasting flat belts.

Next, when buying pasting belt, you also need to check the curling performance of the pasting belt to see if it meets the standards for sheet-based tape. The stronger winding performance makes the work easier and thus improves the work efficiency.

Please contact us direct for more information regarding your specific requirements.

URL video:http://www.yhbelt.com

Whatapp&wechat:+ 0086 13725100585

Email :sales@yhbelt.com